Ahrex Flexi Stripper- Platform For Success

Ahrex Flexi Stripper- Platform For Success

Fishing in Puget Sound from the beach offers many challenges. One of those challenges is the need to cover water. Long searching casts out into our cold Salish Sea inevitably will result with your line in the water. Pulling your floating line off the surface of the water limits your range of casting and your ability to recast immediately after a strike, follow, or fish siting in a different direction. If you’re using a sinking line, it will undoubtedly find its way to the nearest rock covered in barnacles and cut the life of your fly line in half. Not only will it find it’s way to any barnacle, but the tidal movement coupled with constant wind will somehow tangle the fly line up on your boots, waders, net etc.

All of these are problems that previously I dealt with because of my disliking for stripping baskets. Constantly frustrated by fish jumping just 10 feet further out, I’d find myself pulling the fly line off the water, chest deep, bombing casts as far as I could in leaky waders.

The solution was a stripping basket. But for me, a stripping basket changed the way I wanted to dance. I would have to completely alter the way I retrieved my fly line to make sure that it made its way into the basket. After thousands of hours on the water, I was now forced to alter what I believed was part of my success. The way you retrieve a fly is fundamental in my opinion and I didn’t want to change. Thus, the stripping basket solution was not a solution but instead a limiting factor for success.

Over the last 8 months, I’ve had the opportunity to put the Ahrex Flexi Stripper to the test. It’s not a stripping basket, but rather a platform for success. Positioned on the side of my hip, I now can seamlessly retrieve my fly line the way I want. No need to think about stripping your line into a basket. Nothing changes besides the outcome. The line loosely stacks up on the pegs, parts of your fly line dangle into the water while the bulk of your line now sits above the surface. Casting those extra 10 feet is now possible. Your ability to recast after a follow, strike, or sighting is now seamless! You no longer have to “get used to” changing the way you retrieve a fly. Instead, you can dance the way you want to.

Ahrex Flexi Stripper ready to ship today! 

 

Read more

Pull Time Diver- Diver Fly For Fly Fishing

Pull Time Diver- Diver Fly For Fly Fishing

Garret Kremer is a day one Spawn supporter and has always looked to incorporate our products into his flies. This fly is absolutely awesome and one that I have personally fished many times! He created this fly for Snook and Juvenile Tarpon but it has many uses that far outreach the waters in Florida where it was created. We tie it a bit differently here,  but the result on the end of our lines is always the same. 

Materials List:

B10s Gamakatsu Hook Size #1, #2 will also work.

Craft Fur

Silicon Flutter Legs 

EP Foxy Brush or Synthetic Fox Brush

Kestrel Spawn Head

Foam 3mm and 2mm

Krystal Flash

 

Step 1: Place Hook in vise.

Step 2: Tie in your craft fur tail.

Step 3: Tie in two stands of Krystal Flash that run the same length as the craft fur.

 Step 4: Take your EP Foxy Brush or your Synthetic Fox Brush and tie it in right in front of your craft fur.

Step 5: Wrap your brush of choice forward covering about 1/3rd of the hook shank.

Step 6: Tie in your Silicon Flutter Legs. 

 

Step 7: Add Several more wraps in front of your Silicon Flutter Legs.

 

Step 8: Cut out two Diver Shape pieces of foam the bottom being 3mm and the top layer 2mm.

Step 9: Place your Kestrel Head onto the hook and test the fit. It is important that there is plenty of room and that the foam doesn't push head out past the eye of the hook.

Step 10: Tie in a small pinch of Spawn Simi Seal on the bottom of the hook shank.

Step 12: Add gorilla glue around the material where you will be placing the Spawn Head. To ensure the foam doesn't push the Spawn Head out of place, I like to place a Spawn Bulk Shank to hold the head in place and keep the foam at bay. Once the glue is dry, remove the shank and the head will not move!

Read more

Rainbow Yummy

Rainbow Yummy

I don’t like to post flies that I haven’t fished. We want you to be extremely successful using our products, but there comes a point where you can look at a fly without fishing it and know it will be successful. This is that fly. This articulated jig Rainbow Smolt pattern is one I’ve been working on in anticipation of the coastal rivers opening in Washington State. Can’t wait to see you all bring this pattern to life on your local waters!

*We have since added a bit of MEGA Spawn Simi Seal - Polycheate to the top of the Senyos Laser Dub after Step 21. 

Materials List:

Spawn Micro Jig Shank 60 Degree

Spawn Simi Seal Salmon Smolt

Spawn Simi Seal White/Silver

Spawn MEGA Simi Seal  - Polychaete 

SSW with Super Needle Point Size #6 many other hooks will work great. Or Daiichi 2581 New Boss #6

Fish Hunter Marabou Dark Olive

Senyo’s Laser Dub White

Senyo’s Laser Dub Light Olive 

Stripped Goose Biots Fluorescent Hot Pink 

 

 

Step 1: Place your hook of choice in the vise. For this fly I like the Owner SSW with Super Needle Point #6.  

Step 2: Tie in Fish Hunter Marabou Dark Olive as the tail of the fly.

Step 3: Dub your thread with Spawn Simi Seal Silver/White.

Step 4: Wrap your dubbed thread with Spawn Simi Seal forward up just behind the eye of the hook.

 Step 5: Take a small pinch of Spawn Simi Seal Salmon Smolt. Tie it in right behind the eye and veil it back. 

Step 6: Whip finish and add a small layer of head cement or thin resin. 

Step 7: Take a your 60 Degree Spawn Mirco Jig Shank and and add a light olive 4.6mm Mottled Tactical Slotted Tungsten Bead from Hareline.

Step 8: Attach the eye of the hook directly to the Micro Jig Shank.

Step 9: Take Lead Free .020 Wire and wrap it onto the shank. Push it into the slot of the bead. This will keep the bead secure on the neck of the shank.

Step 10: Tie down the shank to secure the connection and the lead free wraps.

Step 11: Tie in Spawn Simi Seal Smolt Belly and veil it back. This will be the start of the body of the fly.

Step 12: Veil back the Simi Seal and tie it down. 

Step 13: Tie in a small pinch of Spawn Simi Seal White/Silver for the belly of the fly. 

Step 14: Tie in another pinch of Spawn Simi Seal Salmon Smolt on the top of the fly. 

Step 15: Take two Fl. Pink Goose Biots and tie them in right behind the bead. 

Step 16: Tie in a small amount of UV Pink Ice dub to replicate the pink cheeks of the rainbow fry. 

Step 17: Tie in another small pinch of Spawn Simi Seal Salmon Smolt on the top of the shank.

Step 18: Take Senyo’s Laser Dub to finish off the body profile of this fly. For the top, tie in Light Olive and veil it back. 

Step 20: To finish the belly of the fly, tie in Senyos Laser Dub White and veil it back along the belly of the fly. 

Step 21: Take the fly out of the vise and add your favorite Spawn Eyes! The last photo is of the fly when wet. 

Read more

Spawn Fly Fish Videos!

Spawn Fly Fish Videos!

We wanted to create a platform that we will constantly update to highlight anyone that is tying or fishing with Spawn Products! We hope this page will boost your views and highlight you all individually! We will do our best to get all of the Youtube videos embedded here on this page, but if we miss one please let us know! Spend a little time on this page and you will love what you find!

Video By: Norbert Renaud 

Type: Fly Tying -Spawn Heads Cala Marty

Social: @norbertrenaud

 

Video By: Nordic Anglers

Type: Fly Tying-Spawn Simi Seal

Social: @nordicanglerscom

Video By: Nordic Anglers 

Type: Fly Tying-Spawn Jig Shank, Spawn Simi Seal 

Social: @nordicanglerscom

Video By: Levi Reppert

Type: Fly Tying- Spawn Simi Seal

Social: @reps85

Video By: Jesse Males

Type: Fly Tying- Spawn Jig Shanks

Social: @backwaterflyfishing

Video By: Milton Gareca 

Type: Fly Tying- Spawn Head

Social @noveoutdoors 

Video By: Nick Clayton

Type: Fly Tying- Spawn Jig Shank

Social: @capt_nickclayton

Video By: Coastfly

Type: Fly Tying- Spawn Simi Seal

Social: @coastfly

Video By: Erik Svendsen 

Type: Fly Tying- Spawn Simi Seal, Spawn Jig Shank

Social: @svenddiesel 

 

Video By: Jesse Males

Type: Fly Tying- Spawn Head

Social: @backwaterflyfishing

Video By: Erik Svendsen

Type: Fly Tying- Spawn Head

Social @svenddiesel 

Video By: Nove Outdoors 

Type: Fishing- Spawn Head

Social @noveoutdoors

Video by: Allen Fly Fshing

Type: Fly Tying- Spawn Head 

Social: @allenflyfish

Video By: Nove Outdoors

Type: Fishing- Spawn Head

Social: @noveoutdoors

Video By: Erik Svendsen

Type: Fly Tying- Spawn Head

Social: @svenddeisel  

 Video by Jesse Males

Type: Fly Tying- Spawn Head 

Social: @backwaterflyfishing

 Video By: Pete Rosanue 

Type: Fly Tying- Spawn Head

Social: @Blueriverflies 

Video By: Jesse Males:

Type: Fly Tying- Spawn Simi Seal

Social: @backwaterflyfishing 

Video By: Nick Clayton

Type: Fly Tying- Spawn Head

Social: @capt_nickclayton

 

Video By: Pete Rosanue 

Type: Fly Tying- Spawn Head

Social: @blueriverflies

 Video By: Nove Outdoors 

Type: Fly Tying- Spawn Head

Social: @noveoutdoors

Video By: Erik Svendsen 

Type: Fly Tying- Spawn Simi Seal, Spawn Jig Shank

Social: @svenddiesel 

 Video By: Nick Clayton

Type: Fly Tying- Spawn Jig Shank

Social: @capt_nickclayton

Video By: Pete Rosaneu

Type: Fly Tying- Spawn Head

Social: @blueriverflies

Video By: Erik Svendsen

Type: Fly Tying- Spawn Head

Social: @svenddiesel 

Video By: Coastfly

Type: Fly Tying- Spawn Head

Social: @coastfly

Video By: Nove Outdoors

Type: Fishing-Spawn Head

Social: @noveoutdoors

Read more

Sculpin Fly for Trout and Bass Fishing!

Sculpin Fly for Trout and Bass Fishing!

Sculpin patterns are a staple in fly boxes around the world. Whether it’s freshwater or saltwater, most predatory fish cannot resist a sculpin snack! Our Spawn Jig Shanks are taking both the success from jig flies and the success from articulated flies and combining the two to creating an irresistible movement in the water. This articulated jig-style sculpin fly is one of my favorite flies I’ve designed and I know it will bring success around the globe!

Materials List:

TP605 #6 or SA220 Size #8

Hen Saddle Tan, Olive or Black

Frosttip Rabbit Strips

Micro Jig Shank

Spawn Simi Seal Sand Dab or Polychaete 

Hareline Slotted Mottled Tungsten Bead Black 

Lead Free .025

  

When selecting a hook for this fly, I like to choose a hook with a longer shank and a decent sized hook gap! Ahrex TP605 is my preferred freshwater hook while the SA220 is my go to saltwater hook for this fly!

Step 1: Place hook in vise.

 

Step 2: Select a mid sized feather from the hen saddle and reverse wrap the feather starting just before the curve of the hook. This feather is building profile for the tail of your sculpin!

Step 3: Strip the hair off the Frosttip Rabbit Strip and tie it in front of the hen saddle feather. The rabbit will give your fly great movement profile and a lifelike fin look due to the frosted tips.

Step 4: Dub your thread and taper your wraps of dubbing toward the eye of the hook.

Step 5: Whip finish and cut the thread.

Step 6: Take your Micro 60 or 90 Degree Jig Shank and insert the your Mottled Tactical Slotted Tungsten Bead. I like heavy flies especially for jig-style flies. Sizes 3.8, 4.6, and 5.5 mm all work great! For this fly I am using a 4.6 mm.

Step 7: Directly connect the hook to the Micro Jig Shank.

Step 8: Take Lead Free Wire Wraps and secure the bead on the Jig Shank!

Step 9: Tie down your Jig Shank and cover the lead free wire ensuring there is no movement with the bead!

Step 10: For the start of the sculpin body, tie in and veil the Spawn Simi Seal along the back of the shank this will help protect the hook from fouling while keeping the articulated movement! 

Step 11: Dub your thread and create the body of the sculpin by laying down overlapping wraps of Spawn Simi Seal! Leave about 3 mm of space from the bead.

Step 12: Take two of the small hen saddle feathers and strip down so that all is left is the tip of the feather. These are to build profile for your next material.

 
Step 13:  Strip more of the frosted tip rabbit off the hide and place this rabbit over the hen saddle feather. Trim away any excess rabbit! This will be your sculpin's pectoral fins! 

Step 14: Once you have tied in the rabbit on both sides, dub your thread with Spawn Simi Seal and wrap it up to the bead. This will be the head of your sculpin! Once you are at the bead whip finish.

Read more